Our experienced technical staff exists to assist you in overcoming any application problem. Skilled design resources and project management capabilities enable us to become closely involved with any such queries, ensuring that the client gets the right products for the requisite purpose. Products that will continuously carry the required current at the specified material or product type in the prevailing conditions are our priority.
Where necessary, we incorporate features enabling the product to resist damage from threats such as impact or pressure. Our products are designed to resist oil, solvents, or corrosive chemicals.
This class of product performance can only be achieved by the company working in harmony with the latest developments and technologies in conductors, insulation, and protective materials. We have acquired extensive knowledge of application requirements through experience with a large network of product users in almost every type of industry and field.
Specifying the right product for a particular application is the first step, of course, and the key to reliability, however, is in the manufacturing process. The product must be free from material and manufacturing defects and weaknesses so that it delivers the ultimate and highest level of results.
We constantly monitor all manufacturing processes and impose the most stringent quality assurance procedures to produce and deliver the most reliable product. It is a factor that is of vital significance where pipes are to be installed in locations where future access will be difficult. That is when our reputation and resources give you peace of mind. At the same time, we recognize that modern commercial and industrial activities create even greater demands on performance and reliability. Consequently, our manufacturing and trading units are under constant review to ensure that the control and monitoring of materials and processes become even more stringent, fully automatic, and precisely documented.
We maintain a close and continuous watch on world developments in mechanical, electrical, and plumbing technology and regulations concerning their implementations so that the products are designed and constructed to be hazard-free under prescribed conditions of use.
We use well-tested, high-quality materials and strictly follow the processes in full compliance with all relevant ASTM, BSS, UK, and international standards and directives.
Our products are manufactured and imported for safe use without risk to health or the environment, on the understanding that users will exercise the same degree of care in their selection and application.
Our company has a quality control department under the supervision of a quality manager to ensure quality at all levels. The quality control department works around the clock to synchronize with the shift system of the plant.
All types of raw materials from our supplier are subject to input quality control tests. Before production, samples chosen from raw materials for the test being carried out are suitable for production approval.
To ensure the quality of the pipes and fittings during the production process and the finished product, the Quality Control department ensures that materials used in the manufacturing process are in strict compliance with the end user’s requirements and that the end product is in conformity with the applicable international standards.
We undergo numerous quality control tests, including regular measurements of critical dimensions, tests for extrusion quality, pipe flattening, burst pressure, impact resistance, joint integrity, hydrostatic soundness, melt flow rate, internal hydrostatic pressure resistance (ICPR), longitudinal reversion (heat reversion), and tensile strength. This ensures optimum quality, reliability, and long-term strength.
Independent inspection provides added assurance that we meet applicable standards and specifications. This is done through unannounced plant audits, verification of materials, procedures, and test equipment, as well as through random sampling and testing of products and materials.
The quality and performance of pipes are assured by a wide array of tough standards, control tests, and independent certifications. We maintain the quality of our products as per the revised and latest international standards on product quality.
We recognize that the occupational health and safety of all employees, contractors, and visitors is the responsibility of the company and the employees, contractors, and visitors. Providing a safe and secure working environment can only be achieved when we understand and accept our responsibilities and have the necessary skills to meet them.
Our system features are not only a long service life but also excellent environmental and social compatibility. Since its inception, we always placed emphasis on the fact that its products and manufacturing processes should not pollute our sensitive ecosystems and has ensured the development of fully recyclable materials. Our system fulfills ecological standards that are demanded today.
The environmentally friendly raw material is used for the production of our pipes and fittings. To ensure its environmental compatibility, all contained additives (color pigments and stabilizers) are extensively tested, not only by our own laboratory but also by prominent independent laboratories
.
The Environmentally friendly material, our products, is recyclable and can be ground, melted, and reutilized for various applications, e.g., motor protections, wheel linings, laundry baskets, and other kinds of plastic, metallic, and brass materials. There are no polluting substances either in its processing or in its disposal.
The environmentally friendly and hygienically enhanced potable water pipe system made by us is physiologically and microbiologically harmless, hygienic, and has low bacterial growth. The technical suitability of our products has been evident all over.
We always emphasized on philosophy that ecological and economic interests should be contradictory, neither during production and sales nor in the application of the product.
In domestic applications, the extrapolated service life of our product is more than 50 years. Peak temperatures of 100°C arising from short disruptions are unproblematic.
Our manufacturing experience reaches back to the development of PVC, HDPE, PPR-C Pipes and fittings, as well as water hand pumps. After producing hundreds of thousands of miles of pipe and extrusions, the company knows exactly what it takes to create quality. In two highly productive facilities, the plant floor is where familiarity with both product and process counts the most. That experience and that growth are behind every inch of our product.
Production begins with exact blend formulations of the best compounds available – to achieve the desired physical properties consistently.
Single and twin-screw extruders have a wide-ranging capability of standard 1/8″ to 24″ diameters and custom extrusions for the production of pipe, duct, angle, solid rounds, hexes, squares, and heavy-wall tubing. Constant supervision and online quality testing ensure consistent quality throughout each production run.
Pushing the standards of quality has been a trademark of our company since the company’s beginnings. On-site, highly sophisticated testing laboratories feature industry-leading technology and equipment developed to specifications engineered exclusively at our laboratory. The industry’s most current understanding of quality is defined right here.
Uniform strength and product consistency are continually monitored through rigorous testing on all our products. Flattening resistance is one test method used.
Our highly sophisticated pressure chambers measure the extreme pressure-bearing capabilities of all pipe sizes up to 24-inch diameters.
Durability and toughness are continually verified for each production run. Rigorous drop-impact testing at varying temperatures is one way to ensure our products exceed industry standards.
Our research and development team contains well-qualified engineers who not only do work in the research and development of the product but also provide a free technical advisory service pre-sales and after-sales to consultants, architects, civil engineers, contractors, and valued customers. Including advice on the properties of Bright Water and the suitability of the material for specific applications.
The technical services also provide demonstrations and training for operators unfamiliar with the handling and jointing of our products. The many advantages and economies possible are best achieved when our products are used correctly. For any type of help, i.e., selection of pressure class of products, handling, installation, jointing to find inert chemicals for Bright Water or other technicalities, information, or a catalog, please contact our technical department without any hesitation. Contact details are mentioned in our website’s Get in Touch area.
Our products are marked by ink-jet stamping as per international standards.
Dear Customer, please do not buy any of our products without our registered trademark # 17179. Please try to buy from or contact our registered offices or distributors mentioned on our website and the Last Title back page of our catalogs for their addresses and contact details because some people misuse our brand name illegally. We just want to deliver you the best quality products with full technical support and cooperation.
Highly sophisticated on-site testing laboratories feature industry-leading technology and equipment developed to specifications engineered exclusively at our company. In fact, the industry’s most current understanding of quality is defined by us.
Our comprehensive quality standards program has always been based on the continuous improvement tools of total quality management (TQM) and statistical process control (SPC). In fact, we were the first in our industry to achieve ISO 9001:2015, ISO 14001:2015, and ISO 45001:2018 certifications and product certifications for complying with the requirement of thermoplastic pipes, fittings, and assemblies for the conveyance of fluids and the determination of the resistance to internal pressure by attributes such as ISO 4427-1:2019 and ISO 1167-1:2006.
By insisting on quality at every level of our operation, we always followed the above-standard certifications and standards.
Bright Water Manufacturing & Trading Company represents many of the world’s leading brands in PVC, U-PVC, CPVC, HDPE, PPRC PIPES and FITTINGS, RUBBER INSULATIONS, WATER HEATERS, RO SYSTEMS, CHEMICALS, HVAC SYSTEMS, SANITARY WARE, CERAMICS, CIVIL & STRUCTURAL ITEMS, ELECTRICAL ITEMS, PUMPS and many more.
Copyright © 2023. All rights reserved.
